Arduino mega 2560 high quality arduino board for 3d printer

Arduino mega 2560 high quality arduino board :

• Arduino Mega 2560 is a microcontroller board based on the ATmega2560.
• It includes digital input/output pins-54, where 16 pins are analog inputs, 14 are used like PWM outputs hardware serial ports (UARTs) – 4, a crystal oscillator-16 MHz, an ICSP header, a power jack, a USB connection, as well as an RST button.
• This board mainly includes everything which is essential for supporting the microcontroller. So, the power supply of this board can be done by connecting it to a PC using a USB cable, or battery or an AC-DC adapter.
• This board can be protected from the unexpected electrical discharge by placing a base plate.
• It has 54 digital input/output pins.

Arduino Mega Specifications:

• The operating voltage of this microcontroller is 5volts
• The recommended Input Voltage will range from 7volts to 12volts
• The input voltage will range from 6volts to 20volts
• The digital input/output pins are 54 where 15 of these pins will supply PWM o/p.
• Analog Input Pins are 16
• DC Current for each input/output pin is 40 mA
• DC Current used for 3.3V Pin is 50 mA
• The static random access memory (SRAM) is 8 KB
• The electrically erasable programmable read-only memory (EEPROM) is 4 KB
• The clock (CLK) speed is 16 MHz
• The USB host chip used in this is MAX3421E
• The length of this board is 101.52 mm
• The width of this board is 53.3 mm
• The weight of this board is 36 g
• 16 analog inputs, 4 UARTs (hardware serial ports).
• 16 MHz crystal oscillator.
• USB connection.
• Power jack.
• ICSP header, and
• Reset button.

It contains everything needed to support the microcontroller. Simply connect it to a computer with a USB cable.

Package includes:

• 1 x Arduino mega 2560.