Heat bed 310x310x3mm thick High Quality 1pc 12V/24V heatbed for 3d printer machine

Heat bed 310 x310x3mm thick High-Quality 1pc for 3d printer machine

Heat bed 310 *310mm 24V Parts for Rep rap Hot Bed  Part 3 Aluminium Plate 3mm bed. Ordinary MK3 only is about 130W, and only about 80 degrees temperature. This thermal bed power boost to 200W. It can be easily up to temperatures above 110 degrees; It has 4 holes very close to the four corners of positioning.

Besides, the bed is easy to break during transportation. And it is difficult to handle. This improved version, in four positioning holes, remains unchanged, and the size is 310*310mm. the positioning hole from the four corners of the increased distance, and made a fillet. So it is not difficult to handle and not easy to break for the angle.

Description of heat bed:

• 1 layer 35μm (1oz base)
• Running 12V/24V  terminals will heat up the bed to 100 degrees in only 2 minutes (Your printer controller will regulate the power to the heat bed in order to get your preset temperature.)

Packages Include:

• 1 x bed.
• Heat bed without cable – wire and thermistor will not be provided.
• Heat bed with 100cm cable – wire and thermistor will be provided.
• Note: Heatbed wires will come without soldered and crimped. Depends on your application you can either solder it directly or you can use connectors. JST female housing and male housing will be provided along with 1 pcs of Thermistor.