E3D Titan Extruder Original for 3D printer

E3D Titan Extruder Original for 3D printer

E3D Titan Extruder Original for 3D printer

Performance of E3D Titan extruder:

• By using a 3:1 gearing ratio, precision milled hobbs, and an adjustable idler lever, Titan is a powerful extruder whilst also being lightweight and compact.

Power

• E3D Titan extruder 3:1 gear ratio means you’re able to use lighter motors as you’ll need less torque for the same filament pushing force – so direct drive setups have a lighter moving carriage, and bowden setups become powerful, reliable printers when combined with an E3D V6 HotEnd.

Versatile

• E3D Titan extruder works well for all configurations ,bowden, direct, 1.75mm and 2.85mm.
• To switch between filament diameters, all that’s required is to replace the filament guide and the bowden adaptor/ HotEnd.

Speed

• Titan extruder ender 3 with high gear ratios often fail with rapid retracts and struggle with keeping up with the Volcano heater block.
• titan extruder ender 3 balanced gearing ratio of 3:1 means that you can cope with fast extrusion situations like Volcano and the lightweight gear-set gives snappy retractions.

Resolution

• Direct drive extruders can have issues with ‘pulsing’ flow due to the lower resolution of the gearing and hobb teeth, this can result in a wavy surface finish, becoming particularly prevalent when printing with low layer heights.
• Using a 3:1 gearing ratio triples the resolution of the system, allowing smoother printing at the lowest of layer heights, using the smallest of nozzles.

Key features:

• titan extruder ender 3 3:1 gearing ratio.
• Individually cut, sharp hobb teeth.
• Direct or bowden.
• Standard or mirrored.
• Groove mount slot.

Kit contains:

• 1 x Titan body standard or mirrored
• 1 x Titan Cover standard or mirrored
• 1 x Idler lever standard or mirrored
• 1 x Filament Guide 1.75 or 2.85, standard or mirrored
• 1 x Steel Pinion Gear
• 1 x Hobb drive
• 1 x PTFE tubing 100mm
• 1 x 1.5mm Hex Wrench
• 1 x 2mm Hex Wrench
• 1 x 2.5mm Hex Wrench
• 3 x M3 x 30 Screws
• 1 x M3 x 8 Screw
• 1 x M4 thumbscrew
• 1 x M4x10 button head screw
• 1 x M4 Nut
• 1 x Idler spring
• 1 x M3 grub screw
• 1 x Shake-proof washer