CS Spring Washer well build M3 M4 and M5 Spring washers

CS Spring Washer well build M3 M4 and M5 washers

CS Spring Washer well build M3 M4 and M5 washers

• spring lock washers have been in use for well over 100 years.
• They are still used on many applications in the belief that they will will “lock” the nut/bolt to the joint and prevent loosening.
• A washer is a thin plate, that is normally used to distribute the load of a threaded fastener.
• A Stainless Steel Spring Washer is generally manufactured in the shape of a disk, with a centralized hole.
• Sometimes square shaped washers are also produced, depending on the end use of the product.
• Similarly, the hole present in the washer can be de-centralised based on its application.
• Spring washers also known as helical or locking washers are used in those applications where the fastener loosening or fastening is required to be prevented during the occurrence of vibrations.
• A stainless steel disc spring washer has 2 diameters – an outer diameter (OD) and an inner diameter.
• The outer diameter of the M3 spring washer, M4 spring washer, M5 spring washer lock washer is about two times their inner diameter (ID), but this can vary quite widely.
• Besides distributing the load of the fasteners, washers can perform many tasks.
• For instance, the m10 stainless steel spring washer can act as a spring. Washers also act as spacers, wear pads, pre loading device, locking device.

 Applications

1. Gas Processing
2. Heat Exchangers
3. Pharmaceuticals
4. Pharmaceutical Equipment
5. Specialty Chemicals
6. Off-Shore Oil Drilling Companies
7. Power Generation
8. Spiral Welded tube for burner pipes and flues
9. Aircraft Exhaust Manifolds
10. Sea Water Equipment

Packaging Includes

• 1 pieces of CS Spring Washer as per order.