Cooling Turbofan
Cooling Turbofan is a cooling fan for 3D Printer Accessories 12V/24V 40*40*10mm DC Blower Radial Cooling Fan.A device for creating a current of air or a breeze, especially.
- A machine using an electric motor to rotate thin, rigid vanes in order to move air, as for cooling.
- When we print a small objects or printing with a high speed the molten layer doesn’t have enough time to settle.
- At the end it makes the mes out of that.
- By the usage of the fan they tend to radiate the heat out.
- This serves a higher importance in achieving the Desired shape with high degree of accuracy.
- Its properties Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you.
4010 cooling fan Specification:
- Rated Voltage: DC 12V/24 V,
- Noise: 22 dBA;
- Air Flow: 2.8 CFM。
- Dimensions: 40 x 40 x 10 mm(1.6 x 1.6 x 0.36 inch);
- Connector: 2 Terminal Connector with 2 pin-ph 2.54;
- Wiring: red wire is connected to positive pole, black wire is connected to negative pole
- Package: 40x40x10mm Fan 12V/24V DC
- Product Specification
- 1m Power consumption: 1.92W Current rating: 0.08A Noise: 24DBA
Features:
- Long Life: 28000h
- Electronic circuit protection
- Wide Application: Suitable for most 3D printer hotend, Computer, Humidifier etc.
Packages Include:
- fan 1 Piece with wire
Verified review - view original
Good product
Working fine
Verified review - view original
Verified review - view original