power module external for 3D Printer withstand high current, it is also called as MOSFET.
Power Module is a type of transistor where the voltage determines the conductivity of the device. Because they can be used to amplify voltages. A lot of 3D printers use MOSFETs to supply a high voltage to their heated beds and hot ends. By adding a MOSFET that is correctly rated and has a heatsink, there’s a much lower chance of anything overheating. The worst case scenario, catching fire.
How do you install an external module?
As these boards are made for 3D printers, the installation process for them is very simple. Once you have connected the control wires, you will need to connect the DC +/- terminals to your printer’s power supply. This is where you will want to use wires with a crimped connection as opposed to bare wires to reduce the risk of any short circuits.
Next, insert you heated bed or hot end wires into the terminals labeled “HOT BED” and you’re all set. We would also recommend you use crimp terminals for the end of the wire that goes to the MOSFET as its screw terminals are better suited to these connectors.
power module Mosfet stable 15 amps for 3d printer heat bed
Reviews
There are no reviews yet