Original E3D V6 hotend kit 12v/24v hot end extruder for 3d printer

Original E3D V6 hotend kit 12v/24v hot end extruder for 3d printer

Original E3D V6 hotend kit 12v/24v bowden/direct 1.75mm/2.85mm hot end extruder for 3d printer.

• The V6 is our flagship HotEnd featuring an all-metal design with high-temperature performance.
• Original E3D V6 hotend features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors.

Features of Original E3D V6 hotend:

1. High-temperature performance
   • Original E3D V6 hotend benefit of an all-metal design means the V6 can comfortably reach 300°C with the supplied thermistor.
   • If you’d like to print at higher temperatures (up to 500°C), then you will need to use a plated copper heater block along with a PT100 or PT1000.
   • Print standard materials such as PLA, PETG and ABS and high-temperature materials such as Polycarbonate, Ultem, Nylon and PEEK.
2. Easy to use
   • Original E3D V6 hotend features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors.
   • Replacement thermistors, PT100’s and thermocouples can be slid into place and secured with a grub screw, ensuring maintenance is simple and painless.
3. Precise
   • Our all-metal HeatBreak maintains a sharp thermal break to provide better control over filament output; improving start and stops when extruding, as well as more effective retraction, combating oozing and stringing.
   • Original E3D V6 hotend all-metal HeatBreak features a refined internal surface finish to reduce extrusion force and improve the reliability of retractions.

Key features:

•  All metal Heat Break
• Maximum temperature: 300ºC
• Cartridge style heater block
• Groove mount

Kit contains:

• 1 x V6 heatsink 1.75mm or 2.85m
• 1 x V6 heatbreak 1.75mm or 2.85mm
• 1 x V6 nozzle 1.75mm or 2.85mm
• 1 x V6 duct
• 1 x V6 aluminium heater block
• 1 x Heater cartridge 12V or 24V
• 1 x Thermistor cartridge
• 1 x Thermistor extension cable
• 1 x 30 x 30 x 10 fan 12V or 24V
• 1 x Thermal compound
• 1 x V6 fixings kit
• 1 x V6 silicone sock
• 1 x PTFE tubing 100mm or 800mm