3d printer heat bed aluminium 12v for 3D Printers:
3d printer heat bed 12V Parts for Rep rap Hot Bed Part 220*220mm Aluminium Plate 3mm bed. Ordinary MK3 only is about 130W, and only about 80 degrees temperature. This thermal bed power boost to 200W. It can be easily up to temperatures above 110 degrees; It has 4 holes very close to the four corners of positioning.
Besides, the heat bed is easily to break during transportation. And it is difficult to handle. This improved version, in four positioning holes remain unchanged, and the size is 220 * 220. the positioning hole from the four corners of the increased distance, and made a fillet. So it is not difficult to handle and not easy to break for the angle .
Description of 3d printer bed :
- 1 layer 35μm (1oz base)
- copper Resistance between 1.4 and 1.6 ohm for the 12V
- With 15V on the 12V terminals will maintain approx. 115 degree Celsius without regulation
- Running on the 12V terminals will heat up the heatbed to 100 degree in only 2 minutes (Your printer controller will regulate the power to the heatbed in order to get your preset temperature.)
- 1 x bed 12v